A full line of Gardner Denver Rotary Screw Compressors – I & M Industrials offers sales and service from the Greenville location to all the Carolina’s including South Carolina and the Augusta GA area. For Inquiries about our compressors and compressed air solutions use the form below or contact our compressor specialists at 864-277-2450,
APEX 15-30 HP Rotary Compressor
The Gardner Denver APEX: Simple, Proven Industrial Compressor within a Small Footprint.
The APEX Series 15-30 hp rotary screw compressors features critical industrial grade components meaning it is not your typical throwaway compressor.
From the easy-to-use controller to the efficient air-end, the APEX Series is a quiet, reliable investment in your organization’s future.
Read more about the Apex line of compressor packages
Electra Screw
40 and 50 HP 
The Electra Screw air compressors are ideal economical compressors for a wide variety of applications. Available in 40 and 50 HP, the Electra Screw units have a solid reputation for reliability and performance.
Read more about the Electra-Screw compressors here.
Electra Saver II
60-200 HP
The time tested and proven Electra Saver II offers large CFM ranges for a variety of demanding needs. Available in 60-200 horsepower, we have an Electra Saver II to match your needs. The 60 through 200 hp units all utilize direct drive, non-geared airends for heavy duty performance and maximum flow capabilities.
- 60Hz
- 163 to 1000cfm
- 60 – 200hp
- Direct Drive
- Low-Noise
- Enclosed or Un-Enclosed
Learn more about the Electra Saver II
Electra Saver II G2
40 – 50 HP
Founded on slow-speed, 1800 rpm design principles the Electra Saver II G2 40-50 hp compressors feature super-sized bearings and up to 40 percent larger airends than the competition. The larger airends, running at slower speeds, maximize efficiency and reduce wear and tear, while the permanent alignment of the airend and motor ensure maximum coupling and bearing life.
- 60Hz
- 40 – 50hp
- 204 to 251 cfm
- Direct-Gear Drive
- Enclosed or Un-Enclosed
- 68-78 dBA
Learn more about the Electra Saver II G2
Electra Saver: Variable Displacement and Turn Valve
50 – 500 HP .
For partial load demand situations, between 60-100% plant capacity, the experienced Electra Saver unit featuring the patented Turn Valve technology offers greater energy savings you will immediately notice!
Learn more about the Electra-Saver here
VS Series – Variable Speed Rotary Screw Compressor
20 – 250 KW
The Smarter Solution: Efficient, Reliable, Flexible…Unmistakable!
The VS Series is a complete, revolutionary compressor line that is a Smarter Solution to your Complex Needs. The efficiency limitations of competitive variable speed drive compressors have been eliminated to establish a new standard in this area. The flexibility of this line exceeds that of any other compressor. This means adjustable flow from 100% – 20%, flexible pressure from 70 -175 at the touch of a button. Not only does the VS provide the ultimate in efficiency, the VS Series variable speed drive compressor is so reliable it is backed by the best warranty in the business.
Read more about the VS Series here.
VST Series – Variable Speed 2-Stage Rotary Screw Compressor
55 – 260 KW
The VST Series is a complete and revolutionary compressor package that is a Smarter Solution to your complex needs. The flexibility of the Gardner Denver VST Series exceeds any other compressor on the market today. This means stable pressure in the plant and maximum productivity at the lowest possible electrical cost. Finally, the VST Series is so reliable it is backed by the most comprehensive warranty in the industry.
More about the VST Series here
Hydrovane – The Rotary Vane Compressor
The Hydrovane series rotary vane compressors are versatile, powerful, reliable and cost effective.
They can be found in trains, ships, engineering, distilling, brewing, packaging sites and in large and small industrial units throughout the world. In fact they are the perfect business solution to your requirement for reliable, high quality compressed air.
2 – 60 HP
The low noise operation of the Hydrovane air compressor means that they can be installed right alongside your equipment. Most models are available either as open units or fitted with enclosure panels which further reduce noise levels.
Gardner Denver L-Series – Fixed Speed Rotary Screw Compressor – 5 – 400 HP (L04 – L290)
Gardner Denver’s L-Series fixed speed oil-lubricated rotary screw compressors range from 5 HP to 400 HP. All compressors are fully enclosed for low noise operation while maintaining extremely small footprints. With standard features including TEFC motors, Wye-Delta starting, microprocessor controls and grouped service components, the L Series delivers exceptional value.
The L Series product line is designed with a high efficiency, high output, Gardner Denver compression element with slow rotational speeds, resulting in reduced energy usage and increased reliability. Focusing on big and little details, our innovative compressor concepts save you time and money. L Series compressors are available in belt drive and direct drive packages and air or water cooled options.
When space is limited, look to our clean AirStation configurations. Equipped with mounted tank and dryer options, our AirStation package is sure to be a good fit.
More about the L-Series on the GD website.
.
Gardner Denver LRS-Series – Variable Speed Rotary Screw Compressor – 10-400HP (L07RS – L290RS)
Gardner Denver LRS Series variable speed compressors set’s a new standard in its comprehensive range of variable speed oil-lubricated rotary screw air compressors from 10 HP to 400 HP. The LRS Series rotary screw compressors employ an innovating variable speed compressors inverter drive system that precisely matches power consumption with air demand, providing world-class energy efficiency.
The LRS rotary screw premium efficiency airend has a high output compression element with slow rotational speed, which further reduces energy costs and increases reliability. Service components are conveniently grouped for reduced downtime and economical maintenance. A quiet enclosure and small footprint make the LRS Series a versatile variable speed rotary screw compressor line.
When space is limited, look to our clean AirStation configurations. Equipped with mounted tank and dryer options, our AirStation package is sure to be a good fit.
More about the LRS-Series here
Gardner Denver Service & Warranty
Protect Your Investment and Leave the Worry to Us
Service
Regular maintenance and service of Gardner Denver products is critical to the performance and longevity of the equipment. Only Gardner Denver can provide:
•The assurance that the investment will provide a lifetime of productivity.
•Aftermarket parts and services that are engineered for use in Gardner Denver products.
•Peace of mind of turning to one supplier and one source for all aftermarket needs.
Warranty
Gardner Denver’s unique engineering philosophy ensures long-lasting reliable equipment. Our standard warranty program ensures that you’ve got piece of mind when it comes to your system’s operation. For a longer life warranty, Gardner Denver offers the most comprehensive extended warranty plan in the Industry – its Platinum Extended Warranty. Simply register your machine at startup, use Gardner Denver warranty kits and lubricant and participate in the oil analysis program and be worry free for up to 10 years.
10-Year Platinum Warranty
The Platinum Warranty is the most comprehensive extended warranty program in the industry. Enrolling your compressor package in the Platinum Warranty program immediately provides additional warranty coverage on many major package components like the airend. It also provides detailed maintenance recommendations making certain your compressor will be reliably operating for many years to come.
Compressor package coverage includes:
10 years on the airend plus 5 years on the motor and many other major package components.
For more information check out our Gardner Denver XTRA Warranty Brochure (PDF file) or contact our Sales department.
Gardner Denver Remanufactured Compressors
Remanufactured Airends is a cost effective solution to new compressors.
I & M offers the complete Gardner Denver line of remanufactured airends.
[iframe id=”https://www.youtube.com/embed/jR2p3LLgU6w” align=”center” mode=”normal” autoplay=”no” aspect_ratio=”16:9″ maxwidth=”600″ grow=”yes”]
Lubrication: Please check out or service page for compressor oils and lubricants