Condensate Drain Valves by Drain-All
This model replaces the Model 1700 and includes Drain-All’s patented “through port design” for more throughput capacity of solid debris. This is Drain-All’s standard condensate trap in the line. It will fit most industrial applications and compressors up to approximately 1500 hp depending on the ambient conditions and other factors.
Part Number DH50-0LAAA
- Max Working Pressure 170PSIG
- ½” Inlet/Outlet connections
BekoMat
The BekoMat is setting the standard for the compressed air condensate drain industry. These drains offer true zero air loss, Unaffected by dirt contamination, Safe for all condensate types, Fully automatic with monitor levels and an Integrated Alarm. Compressed air systems generate water continuously and therefore need a reliable drain system to remove the water generated by compression. Without properly operating drains, the best air dryer in the world will only cause you problems. If you find water in your compressed air lines, please give us a call. We can’t stop the generation of water, but we can remove it!
Nano NMD-12
The economical no-loss drain valve value. A Nano NMD-12 drain valve gives you all the benefits of an expensive no loss drain valve in a dependable industrial design at a real reasonable price.
- No electricity required
- When the primary inlet is used no balancing line is required
- Automatic operation
- No loss drain — No compressed air loss during operation
A float in theNMD-12 reservoir rises as condensate collects. Once 8 ounces are collected the valve opens. When the condensate finishes draining, magnetic force closes the valve. No timers to set or plug in. The NMD-12 operates automatically and does not waste any valuable compressed air.
Timer Drains
Timer drains are electrically operated units in which an adjustable timer periodically opens a valve to remove accumulated condensate. Timer drains are basic components used in most compressed air systems because they provide an inexpensive, reliable means of removing condensate without having to manually open drains’ valves. Timer drains are used on filters, air receivers, air dryers, separators, aftercoolers, and other compressed air system components. All models are designed with solid-state controls for reliability. Several types of valves and timers are used to fit the customer’s specific needs. We carry timer drains manufactured by ASCO, Domnick-Hunter, Posi-Drain, and Airtek.
WaterHog™ Zero Loss Condensate Drain Model LH50
The WaterHog™ powers through condensate build up:
Ideal for Compressor Applications Up to 100 hp. The WaterHog ™ Design Avoids
Small Passages Ensuring Clog – Free Operation.- Fully Automatic Operation:
No Timer or Manual Settings. - No Electrical Connection:
WaterHog ™ is Powered by Compressed Air, Avoiding the Need for
Electrical Wiring and Connections. - Energy Saving Operation:
Zero Compressed Air Loss. Check With Your Utility to See If the
WaterHog™ Qualifies for Energy Efficiency Incentives. The WaterHog™ Pays for
Itself When Replacing Open Condensate Drains Valves or Timer Traps. - Low Profile:
The 4.7” Vertical Operating Height Allows the WaterHog™ to Fit Where Other Larger
Units Can’t. - Max Operation Pressure: 200 PSIG
Min/Max Control Pressure: 40/130 PSIG
Min/Max Temperature: 34°F / 170°F - 2 Year Warranty
For inquiries and quotes please contact us at 1-800-686-2450